Request Information Search by Specification
  • 2-1/2 Inch (in) Inside Diameter, 3.116 Inch (in) Groove Diameter, and 0.235 Inch (in) Width Rod Buffer Seal

    Rod Buffer Seals

    (110)

  • TR002 1/4 Inch (in) Inside Diameter, 7/16 Inch (in) Outside Diameter, and 0.15 Inch (in) Width T-Seal

    T-Seals for Rod

    (50)

    T-Seals are designed to take the place of o-rings in dynamic fluid power applications. They help reduce extrusion, spiral or twisting failure.

  • 1 Inch (in) Inside Diameter, 1.298 Inch (in) Groove Diameter, and 0.122 Inch (in) Width 2 PC Rod Buffer Seal

    Metric Rod Buffer Seals

    (155)

    Designed to fit on one or two piece pistons, this piston seal employs a nitrile seal for high sealability, nylon split back ups for extrusion resistance, and two split bearing rings. No further support bearings are required

  • Metric Heavy-Duty Rod Seals

    Metric Heavy-Duty Rod Seals

    (41)

    Featuring high pressure and shock load capability. The twin lip design offering lower friction, improved sealing, primary lip protection, increased seal stability, and a polyacetal anti-extrusion ring.

    Polyurethane -50ºF to +230ºF 0 to 10,000 PSI
    There should also be a section for these in the standard size.

  • Twin Lip Rod Seals

    Hallite Twin Lip Rod Seals

    (219)

    Polyurethane -50ºF to +230ºF 0 to 6000 PSI
    The twin lip design is an asymmetric seal offering superlative dry rod sealing for light and medium duty applications. The twin lip offers lower friction, improved sealing, primary lip protection, increase seal stability and easy installation.

  • Twin Lip Rod Seals

    Metric Twin Lip Rod Seals

    (176)

    Polyurethane -50ºF to +230ºF 0 to 6000 PSI
    The twin lip design is an asymmetric seal offering superlative dry rod sealing for light and medium duty applications. The twin lip offers lower friction, improved sealing, primary lip protection, increase seal stability and easy installation.